top of page

Shouldice Stone

MJ Saratoga Brick

This spectacular stone veneer resonates with an arresting aura of stature, attainment and gracious living. MJ Saratoga Brick has an exclusive, sculptured stamped face across every piece. Earth tone color blends, three heights and multiple lengths pre-blended on every cube guarantees minimal cutting as the sizes of Saratoga fit together with ease with economy and unsurpassed beauty.

Dimensions

​

  • Width: 3.5"

  • Height: 3.5

  • Length: 11.5"

  • Pcs./Sqft: 3.0/sqft

  • Pcs./Cube: 231

  • Wt/Pc: 12/lb

  • Wt Per Cube: 2710 lbs

  • Pallet Size: 40" Wide x 40" Deep

  • 77 sqft

​

​

Specs

​​

  • MJ Saratoga Brick is a quality Concrete Masonry Block Unit.

  • MJ Saratoga Brick exceeds the CSA A165.2 Series-04 and the ASTM C-55-11 specifications.

  • MJ Saratoga Brick will not flake or deteriorate whether it is used above grade, at grade or even below grade.

  • Maximum water absorption by mass not to exceed 8 percent.

  • Recommended to be installed with Type ‘N’ masonry cement (see TEK 9-1A Mortars for Concrete Masonry).

  • MJ Saratoga Brick is manufactured using an integral water repellent agent which inhibits water absorption and efflorescence for a lifetime of performance.

  • Minimum compressive strength 4,000 PSI.

  • Recommended mortar joint 1/2″.

  • Cold weather construction – refer to installation guidelines.

  • Manufactured Under U.S. Patent 4,335,549 and Canadian Patents 1,169,265 and 2,127,191.

​

​

bottom of page